Alkoxy-Bridged Dicopper(II) Cores Meet Tetracyanonickelate Linkers: Structural, Magnetic, and Theoretical Investigation of Cu/Ni Coordination Polymers.

Two heterometallic Cu(II)/Ni(II) coordination polymers, [Cu2(Hbdea)2Ni(CN)4]n (1) and [Cu2(dmea)2Ni(CN)4]n·nH2O (2), were successfully self-assembled in water by reacting Cu(II) nitrate with H2bdea (N-butyldiethanolamine) and Hdmea (N,N-dimethylethanolamine) in the presence of sodium hydroxide and [Ni(CN)4]2-. These new coordination polymers were investigated by single-crystal and powder X-ray diffraction and fully characterized by FT-IR spectroscopy, thermogravimetry, elemental analysis, variable-temperature magnetic susceptibility measurements, and theoretical DFT and CASSCF calculations. Despite differences in crystal systems, in both compounds, each dinuclear building block [Cu2(µ-aminopolyalcoholate)2]2+ is bridged by diamagnetic [Ni(CN)4]2- linkers, resulting in 1D (1) or 2D (2) metal-organic architectures. Experimental magnetic studies show that both compounds display strong antiferromagnetic coupling (J = -602.1 cm-1 for 1 and -151 cm-1 for 2) between Cu(II) ions within the dimers mediated by the µ-O-alkoxo bridges. These results are corroborated by the broken symmetry DFT studies, which also provide further insight into the electronic structures of copper dimeric units. By reporting a facile self-assembly synthetic protocol, this study can be a model to widen a still limited family of heterometallic Cu/Ni coordination polymer materials with different functional properties.

Diverse 3-Methylthio-4-Substituted Maleimides through a Novel Rearrangement Reaction: Synthesis and Selective Cell Imaging.

A transition metal-free protocol for the preparation of fluorescent and non-fluoresent 3-methylthio-4-arylmaleimides in a single step through a new rearrangement from thiazolidine-2,4-diones is described. By employing the optimized reaction conditions, a broad scope of derivatives was prepared in ≤97% yield. The reaction tolerated several substituted aryl groups, including the challenging preparation of pyridyl-containing derivatives. A series of control experiments strongly suggested that the new rearrangement involves a key isocyanate intermediate and a further reaction with in situ-generated methylthiomethyl acetate. The photophysical properties of some of the synthesized derivatives as well as their use in live cell imaging were also investigated, revealing that some of the substituted maleimides are capable of selectively staining different regions of the cells.

Metal-Cocatalyst Interaction Governs the Catalytic Activity of MII-Porphyrazines for Chemical Fixation of CO2.

Chemical fixation of CO2 to produce cyclic carbonates can be a green and atomic efficient process. In this work, a series of porphyrazines (Pzs) containing electron-withdrawing groups and central MII ions (where M = Mg, Zn, Cu, and Co) were synthesized and investigated as catalysts for the cycloaddition of CO2 to epoxides. Then, the efficiency of the Pzs was tested by varying cocatalyst type and concentration, epoxide, temperature, and pressure. MgIIPz bearing trifluoromethyl groups (1) showed the best conversion, producing, selectively, 78% of propylene cyclic carbonate (PCC), indicating that a harder and stronger Lewis acid is more effective for epoxide activation. Moreover, cocatalyst variation showed a notable effect on the reaction yields. Spectrophotometric titrations, MALDI-TOF mass spectra, and theoretical calculations suggest poisoning of the catalyst when tetrabutylammonium chloride (TBAC) and large amounts of tetrabutylammonium bromide (TBAB) were used in the system. The same was not observed for tetrabutylammonium iodide (TBAI), indicating that the metal-cocatalyst interaction may govern the reaction rate. In addition, two rare examples of crystalline structures were obtained, proving the distorted square pyramidal geometry with water molecule as axial ligand. This is one of the first studies reporting Pzs as catalysts for the chemical fixation of CO2, and we believe that the intricate balance between cocatalyst concentration and conversion efficiency shown here may aid future studies in the area.

Insights on a new sulfonamide chalcone with potential antineoplastic application.

Chalcones (E)-1,3-diphenyl-2-propene-1-ones, a class of biosynthetic precursor molecules of flavonoids, have a wide variety of biological applications. Besides the natural products, many synthetic derivatives and analogs became an object of continued interest in academia and industry. In this work, a synthesis and an extensive structural study were performed on a sulfonamide chalcone 1-Benzenesulfonyl-3-(4-bromobenzylidene)-2-(2-chlorophenyl)-2,3-dihydro-1H-quinolin-4-one with potential antineoplastic application. In addition, in silico experiments have shown that the sulfonamide chalcone fits well in the ligand-binding site of EGFR with seven µ-alkyl binding energy interactions on the ligand-binding site. Finally, the kinetic stability and the pharmacophoric analysis for EGFR indicated the necessary spatial characteristics for potential activity of sulfonamide chalcone as an antagonist.

Multicomponent ionic crystals of diltiazem with dicarboxylic acids toward understanding the structural aspects driving the drug-release.

Diltiazem (DIL) is a calcium channel blocker antihypertensive drug commonly used in the treatment of cardiovascular disorders. Due to the high solubility and prompt dissolution of the commercial form hydrochloride (DIL-HCl) that is closely related to short elimination drug half-life, this API is known for exhibiting an unfitted pharmacokinetic profile. In an attempt to understand how engineered multicomponent ionic crystals of DIL with dicarboxylic acids can minimize these undesirable biopharmaceutical attributes, herein, we have focused on the development of less soluble and slower dissolving salt/cocrystal forms. By the traditional solvent evaporation method, two hydrated salts of DIL with succinic and oxalic acids (DIL-SUC-H2O and DIL-OXA-H2O), and one salt-cocrystal with fumaric acid (DIL-FUM-H2FUM) were successfully prepared. An in-depth crystallographic description of these new solid forms was conducted through single and powder X-ray diffraction (SCXRD, PXRD), Hirshfeld surface (HS) analysis, energy framework (EF) calculations, Fourier Transform Infrared (FT-IR) spectroscopy, and thermal analysis (TG, DSC, and HSM). Structurally, the inclusion of dicarboxylic acids in the crystal structures provided the formation of 2D-sheet assemblies, where ionic pairs (DIL+/anion-) are associated with each other via H-bonding. Consequently, a substantial lowering in both solubility (16.5-fold) and intrinsic dissolution rate (13.7-fold) of the API has been achieved compared to that of the hydrochloride salt. These findings demonstrate the enormous potential of these solid forms in preparing of novel modified-release pharmaceutical formulations of DIL.

Crystal structure, vibrational frequencies and polarizability distribution in hydrogen-bonded salts of pyromellitic acid.

Structural features of moderate-to-strong O-H...O hydrogen bonds are related to the frequencies of O-H stretching vibrations and to the electric polarizability distribution in the donor and acceptor functional groups for crystals synthesized from the 1,2,4,5-benzenetetracarboxylic (pyromellitic) acid, namely: bis(3-aminopyridinium) dihydrogen pyromellitate tetrahydrate, (1); bis(3-carboxypyridinium) dihydrogen pyromellitate, (2); bis(3-carboxyphenylammonium) dihydrogen pyromellitate dihydrate, (3); and bis(4-carboxyphenylammonium) dihydrogen pyromellitate, (4). A combination of single-crystal X-ray diffraction, powder Raman spectroscopy and first-principle calculations in both crystalline and gaseous phases has shown that changes in the O-H...O hydrogen-bond geometry can be followed by changes in the corresponding spectral modes. Vibrational properties of moderate hydrogen bonds can be estimated from correlations based on statistical analysis of several compounds [Novak (1974). Struct. Bond. 18, 177-216]. However, frequencies related to very short O-H...O bonds can only be predicted by relationships built from a subset of structurally similar systems. Moreover, the way in which hydrogen bonds affect the polarizability of donor and acceptor groups depends on their strength. Moderate interactions enhance the polarizability and make it more anisotropic. Shorter hydrogen bonds may decrease the polarizability of a group as a consequence of the volume restraint implied by the neighbour molecule within a hydrogen-bonded aggregate. This is significant for evaluation of the electric susceptibility in crystals and, therefore, for estimation of refractive indices and birefringence.

Enhancing the solubility and permeability of the diuretic drug furosemide via multicomponent crystal forms.

Furosemide (FSM) is a biopharmaceutical classification system (BCS) class IV drug, being a potent loop diuretic used in the treatment of congestive heart failure and edema. Due to its low solubility and permeability, FSM is known for exhibiting poor oral bioavailability. In order to overcome or even minimize these undesirable biopharmaceutical attributes, in this work we have focused on the development of more soluble and permeable multicomponent solid forms of FSM. Using solvent evaporation as crystallization method, a salt and a cocrystal of FSM with imidazole (IMI) and 5-fluorocytosine (5FC) coformers, named FSM-IMI and FSM-5FC, respectively, were successfully prepared. A detailed structural study of these new solid forms was conducted using single and powder X-ray diffraction (SCXRD, PXRD), Fourier Transform Infrared (FT-IR) and proton Nuclear Magnetic Resonance (1H NMR) spectroscopy and thermal analysis (thermogravimetry, differential scanning calorimetry and hot-stage microscopy). Both FSM-IMI and FSM-5FC showed substantial enhancements in the solubility (up 118-fold), intrinsic dissolution (from 1.3 to 2.6-fold) and permeability (from 2.1 to 2.8-fold), when compared to the pure FSM. These results demonstrate the potential of these new solid forms to increase the limited bioavailability of FSM.

Binucleating Hydrazonic Ligands and Their µ-Hydroxodicopper(II) Complexes as Promising Structural Motifs for Enhanced Antitumor Activity.

Very few inorganic antineoplastic drugs have entered the clinic in the last decades, mainly because of toxicity issues. Because copper is an essential trace element of ubiquitous occurrence, decreased side effects could be expected in comparison with the widely used platinum anticancer compounds. In the present work, two novel hydrazonic binucleating ligands and their µ-hydroxo dicopper(II) complexes were prepared and fully characterized. They differ by the nature of the aromatic group present in their aroylhydrazone moieties: while H3L1 and its complex, 1, possess a thiophene ring, H3L2 and 2 contain the more polar furan heterocycle. X-ray diffraction indicates that both coordination compounds are very similar in structural terms and generate dimeric arrangements in the solid state. Positive-ion electrospray ionization mass spectrometry analyses confirmed that the main species present in a 10% dimethyl sulfoxide (DMSO)/water solution should be [Cu2(HL)(OH)]+ and the DMSO-substituted derivative [Cu2(L)(DMSO)]+. Scattering techniques [dynamic light scattering (DLS) and small-angle X-ray scattering] suggest that the complexes and their free ligands interact with bovine serum albumin (BSA) in a reversible manner. The binding constants to BSA were determined for the complexes through fluorescence spectroscopy. Moreover, to gain insight into the mechanism of action of the compounds, calf thymus DNA binding studies by UV-visible and DLS measurements using plasmid pBR322 DNA were also performed. For the complexes, DLS data seem to point to the occurrence of DNA cleavage to Form III (linear). Both ligands and their dicopper(II) complexes display potent antiproliferative activity in a panel of four cancer cell lines, occasionally even in the submicromolar range, with the complexes being more potent than the free ligands. Our data on cellular models correlate quite well with the DNA interaction experiments. The results presented herein show that aroylhydrazone-derived binucleating ligands, as well as their dinuclear µ-hydroxodicopper(II) complexes, may represent a promising structural starting point for the development of a new generation of highly active potential antitumor agents.

Synthesis, crystal structure and topological analysis of a three-dimensional polymeric network based on zinc(II), potassium and 5-sulfobenzene-1,3-dicarboxylate (SIP).

Aromatic polycarboxylate linkers provide structural rigidity and strong interactions among the metal centre and the carboxylate O atoms. A new three-dimensional coordination polymer namely, catena-poly[potassium [tetraaqua(µ-5-sulfobenzene-1,3-dicarboxylato)zinc(II)]], {K[Zn(C8H3O7S)(H2O)4]}n or {K[Zn(SIP)(H2O)4]}n, where SIP is 5-sulfobenzene-1,3-dicarboxylate or 5-sulfoisophthalate, was obtained and characterized by elemental analysis and IR vibrational spectroscopy, and the single-crystal structure was determined by X-ray diffraction analysis. The compound crystallizes in the monoclinic space group P21/n with Z = 4. Topological analysis revealed that K-O interactions form a two-dimensional network, which is uninodal 4-connected and can be described with a point symbol (44.62), and this plane network is classified as sql/Shubnikov. The layers are connected by Zn2+ ions coordinated to the SIP linker, forming a three-dimensional network. This net is a trinodal (3,5,6)-connected system with point symbol (3.44.52.62.73.83).(3.44.52.62.7).(3.72).

Synthesis of glycerol carbonate over a 2D coordination polymer built with Nd3+ ions and organic ligands.

In this work, a two-dimensional coordination polymer was synthesized and the structure was determined by single-crystal X-ray diffraction. The crystal structure belongs to the space group Pna21 and was characterized by Raman and FT-infrared spectroscopy, powder X-ray diffraction and Brunauer-Emmett-Teller surface area analysis. Catalyst activities were evaluated through the synthesis of glycerol carbonate from glycerol and urea using a batch reactor. After the optimization of both reaction and reaction conditions, the activity results showed that the coordination polymer used as a heterogeneous catalyst has good values of conversions and selectivity for the manufacturing of glycerol carbonate in a fine-chemical process. The analysis of powder X-ray diffraction and spectroscopy for the coordination polymer employed, before and after the reaction, shows that some changes have taken place in the crystal structure during the process, in spite of a recovery at the end of the reaction. The advantages and limitations of the coordination polymer were discussed and compared with those of the previous heterogeneous catalysts in the literature.